Model: E12 2.4m Side Height

Event-Banner.gif

Aluminium Frame Specification

Span Width: 12006mm
Eave Height: 2400mm
Ridge Height:  4400mm
Roof Pitch: 18°
Longest Component: 6590mm (Rafter with insert)
Aluminium Profile: 120mm x 80mm 4 track
Aluminium Spec: Anodised, Extruded, Tempered, 6082
Wind Speed Rating: 70mph, 31m/s, 113km/h
Snow Loading: 0.2kn m2 Not including internal hanging loads
Purlin Profile: 62mm x 62mm 2 track & 60mm x 60mm
Steel Spec: Hot Dip Galvanised Steel Inserts
Bay Spacing: 3m
Frame Bracing: Roof Wires with Diagonal Bar or Portal Brace
Ground Fixing: 850mm Stakes, Anchor Bolts, Weights
Maximum suspended weight per span: 85kg from a single point or 170kg if spread evenly across the span from two points.
Structural Calculations: BS6399 pt2 (wind) & BSEN 1999 Eyrocode 9

 

PVC Specification

PVC Spec: 650g m2, Anti Mould, Low Wick, UV Resistant
Fire Rating: BS, DIN & M2 Standard
Colour: White as standard, others available upon request
Roof Options: Plain White, Clear
Gable Options: Plain White (one piece), Clear (one piece)
Wall Options: One Piece, Centre Laced, Windowed, Panoramic
Tensioning: Bar tension with ratchet straps

 

The main structure of the marquee comprises anodised extruded aluminium profiles. The rafters spaced across the ridge and eaves have quick assembly push fit connections.

The basic unit is 6m long, with wind bracing bays at each end. This can be added to in sections of one bay, and can thus be extended to any length as required. In the case of any length over 24m an additional braced bay would be required.
Maximum spacing between wind bracing bars : 6 bays.
 
The marquee framework can either be erected on steel footplates or on hoecker flooring systems. The anchoring method depends upon structural calculations. The structure is assembled from ground level upwards, so no dangerous roof work is involved!
 
The rafters have keder tracks for the PVC sheet keder edges to be inserted, thus resulting in a very tight and secure join between the framework and the PVC sheet.
 
Walls: Keder edges, sliders at top edge for keder tracked eave and gable purlins, laced at centre, white as standard, other colours avaliable upon request.
 
The marquee can be supplied with tested structural calculations. According to structural calculations it is stable in structure to BS6399 pt2 (Wind) & BSEN 1999 Eurocode 9. Design of aluminium structures.
 
Snow must be cleared from the roof regularly or a constant temperature of 12 degrees C must be maintained at the ridge point.

Gallery.png
 
 
 
 
 

 

Avaliable Options For This Structure:

linings.pngfloor.pngdoors.pnglighting.png
high-peak-roofs.pnghip-gables.pngservice-extension.png
 
 
Hoecker Structures (UK) Ltd , 1 Robinson Way, Telford Way Industrial Estate, Kettering, Northamptonshire, NN16 8PT 
Tel: +44 (0)1536 316 970 Fax: +44 (0)1536 316 979
 
Registered in England 2544823

 

MUTA Member logo    fnl_facebook_logo.png    Manufactured in the UK