Model: P3 2.4m Side Height

Hoecker Structures Party Range

Aluminium Frame Specification

Span Width: 2966mm
Eave Height: 2400mm
Ridge Height:  2940mm
Roof Pitch: 20°
Longest Component: 3800mm (Diagonal Bar)
Aluminium Profile: 48mm x 89mm 2 track / 48mm x 110mm 4 track
Aluminium Spec: Anodised, Extruded, Tempered, 6082
Wind Speed Rating: 60mph, 27 m/s, 97km/h
Snow Loading: 0.2kn m2 Not including internal hanging loads
Purlin Profile: 60mm x 60mm
Steel Spec: Hot Dip Galvanised Steel Inserts
Bay Spacing: 3m
Frame Bracing: Diagonal Bar or Portal Brace
Ground Fixing: 850mm Stakes, Anchor Bolts, Weights
Structural Calculations: BS EN 1999 Eurocode 9
BS EN 1991-1-4:200+A1:2010 [wind]
BS EN 13782:2015

 

PVC Specification

PVC Spec: 650g m2, Anti Mould, Low Wick, UV Resistant
Fire Rating: BS, DIN & M2 Standard
Colour: White as standard, others available upon request
Roof Options: Plain White, Clear
Gable Options: Plain White (one piece), Clear (one piece)
Wall Options: One Piece, Centre Laced, Windowed, Panoramic
Tensioning: Elasticated rope to the eave purlins

 

Weights

2 Bays frame (6m): 244kg
2 Bays PVC (6m): 76kg
Extension bay frame: 70kg
Extension bay PVC: 27kg
Volume 2 bays: 0.3m3
Volume ext. bay: 0.1m3
* All dimensions, weights and transport volume given are approximate!

 

The main structure of the marquee is created by rafters and side uprights formed from extruded anodised aluminium profiles. These components are connected by heavy duty hot dipped galvanised steel inserts allowing fast assembly with pins and clips.

The basic unit is two bays (6m) in length and has two wind brace bays, the modular design allows additional 3m bays to be added at any time to achieve the desired length. At 27m in length an additional wind brace bay is required. Maximum spacing allowed between braced bays is 6 unbraced bays.

The marquee framework can be erected direct to the ground with the steel base plates and stakes supplied or alternatively fixed to the optional hoecker flooring systems. The anchoring method depends upon structural calculations. The structure is assembled on the ground, each frame hinges into place and fixed upright, so no dangerous roof work is involved!

The rafters and uprights have keder tracks for the PVC roof and wall cover keder edges to be inserted, thus resulting in a very tight and secure join between the framework and the PVC sheet.

Walls: Keder edges, rings at top edge for wall hanging bars, laced at centre, with tie-back cords for when left open. White as standard, other colours available upon request.

The marquee can be supplied with tested structural calculations. According to structural calculations it is stable in structure to

BS EN 1991-1-4:200+A1:2010 [wind], BS EN 13782:2015, Temporary Structures, - Tents Safety and BS EN 1999 Eurocode 9. Design of
Aluminium Structures

Snow must be cleared from the roof regularly or a constant temperature of 12 degrees C must be maintained at the ridge point.
 
Gallery.png
 
 
 P3

 

Avaliable Options For This Structure:

linings.pngfloor.pngdoors.pnglighting.png
 
 
The images below represent how your marquee might look by using some of the avaliable options:
 
gallery1 gallery1 gallery1
gallery1 gallery1 gallery1
 
 
Hoecker Structures (UK) Ltd , 1 Robinson Way, Telford Way Industrial Estate, Kettering, Northamptonshire, NN16 8PT 
Tel: +44 (0)1536 316 970 Fax: +44 (0)1536 316 979
 
Registered in England 2544823

 

MUTA Member logo    fnl_facebook_logo.png    Manufactured in the UK