Our Party System Structures

• Hoecker marquees are fast to assemble, the connections for the aluminium roof spans are push fit design from galvanised steel then locked by pin and clip, forming a modular design.

• The Party system is in 3m modules. The basic unit length is 6m, and can be extended from that in further matching modules to form the required length.

• Extra sections can be added in this way to all our Models, giving flexibility and choice. Structures exceeding 24m in length will require additional wind bracing, the maximum spacing between wind bracing is 6 bays.

• The marquee can be erected direct to the ground on steel foot plates, or if required can be mounted directly to the Hoecker steel/aluminium sub-floor system. Structures are supplied with anchoring stakes, but varying ground conditions may affect anchoring calculations.

• The Hoecker marquee is designed to be assembled on the ground. It is then hinged into it’s vertical position and fixed into place, preventing any need for potentially dangerous temporary ties or roof work.

Click Here for Party System Structures Options

•The aluminium roof trusses and side uprights have slot tracks for the PVC sheet ‘keder’ edges to slide into. This forms the secure and watertight join between frame and cover which makes the structure modular, and allows control of the cover when working in windy conditions.

• PVC Side walls are fitted into the side upright tracks, hang on a top bar and are centre-laced to allow entrance in any wall. Roof covers are tensioned by elastic rope and hook to the eave purlin.

• All PVC covers are Fire retardant to relevant BS, DIN & M2 standards, UV resistant, mould inhibited and lacquered.

• These structures are calculated for 60mph winds , no allowance has been made for snow which must be cleared from the roof regularly or a constant temperature of 12ºC maintained.

• All dimensions, weights and transport volumes given are approximate.