Temporary Warehousing Stores and Structures

Hoecker Temporary Stores structures are fast to assemble, the extruded aluminium roof spans and side uprights are connected by hot dip galvanised steel inserts, aluminium purlins connect the spans to form the modular design. Roof and wall options slot into the extruded track.

The TS system comes in 2.5 and 3m frame spacing, dependant on span, side ht and wind/snow load capacity required as seen below in the table.  The basic unit length being two bays: (totalling 5 or 6m) and can be extended in modules of 2.5m or 3m to form the required length.  Internal bracing height dimensions indicate an eave to eave crosswire.

Many covering options are available from the simplest PVC covers with ‘curtain’ style doors through to double skin roofs with hard walling and roller shutter doors for security and climate control.

Structures are best anchored to a concrete surface for highest wind speed resistance and minimum maintenance but can be anchored with stakes where this is not possible. 

Extra sections can be added in this way at any time giving flexibility and choice.

Standard Structure spans indicated below, special spans available on request.

Model	Profile	Clear Span	Frame 2.5m	Spacing 3m	Eave Height	Ridge Height	Internal bracing ht.
TS5	120/80/3	5m			2.4m	3.2m	N/A
					3m	3.8m	N/A
					3.4m	4.2m	N/A
TS6	120/80/3	6m			2.4	3.35m	N/A
					3m	3.95m	N/A
					3.4m	4.37m	N/A
TS9	120/80/3	9m			2.4	3.85m	N/A
					3m	4.45m	N/A
					3.4m	4.85m	N/A
TS10	120/80/3	10m			2.4m	4m	N/A
					3m	4.6m	3.05m
					3.4m	5m	3.45m
TS12	120/80/3	12m			2.4m	4.35m	2.45m
					3m	4.95m	3.05m
					3.4m	5.35m	3.45m